Sec. 101.809 Bandwidth and emission limitations.
(a) Stations in this service operating on frequencies in the 27.23-
27.28 MHz band will be authorized to employ only amplitude modulated or
frequency modulated emission for radiotelephony. The authorization to
use such emissions will be construed to include authority to employ
unmodulated emission only for temporary or short periods necessary for
[[Page 807]]
equipment testing incident to the construction and maintenance of the
station.
(b) Stations in the service operating on frequencies above 940 MHz
may be authorized to use amplitude modulated, frequency modulated or
pulse type of emission for radiotelephony and television. In addition,
the use of unmodulated emission may be authorized in appropriate cases.
(c) The maximum bandwidths which will normally be authorized for
single channel operation on frequencies below 500 MHz in this service
must not exceed the limits set forth below:
------------------------------------------------------------------------
Authorized
Type of emission bandwidth (kHz)
------------------------------------------------------------------------
A3E.................................................. 8
F3E or (G3E)......................................... 40
------------------------------------------------------------------------
(d) Maximum bandwidths in the following frequency bands must not
exceed the limits set forth below:
------------------------------------------------------------------------
Maximum
Frequency band (MHz) authorized
bandwidth (MHz)
------------------------------------------------------------------------
3,700 to 4,200....................................... 20
5,925 to 6,425....................................... 30
6,425 to 6,525....................................... 25
10,700 to 12,200..................................... 40
13,200 to 13,250..................................... 25
22,000 to 23,600..................................... 100
------------------------------------------------------------------------
(e) The bandwidths authorized on frequencies above 500 MHz must be
appropriate to the type of operation in any particular case. An
application requesting such authorization must fully describe the
modulation, emission, and bandwidth desired and must specify the
bandwidth to be occupied.
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.