Goto Section: 15.109 | 15.113 | Table of Contents
FCC 15.111
Revised as of
Goto Year:1996 |
1998
Sec. 15.111 Antenna power conduction limits for receivers.
(a) In addition to the radiated emission limits, receivers that
operate (tune) in the frequency range 30 to 960 MHz and CB receivers
that provide terminals for the connection of an external receiving
antenna may be tested to demonstrate compliance with the provisions of
Sec. 15.109 with the antenna terminals shielded and terminated with a
resistive termination equal to the impedance specified for the antenna,
provided these receivers also comply with the following: With the
receiver antenna terminal connected to a resistive termination equal to
the impedance specified or employed for the antenna, the power at the
antenna terminal at any frequency within the range of measurements
specified in Sec. 15.33 shall not exceed 2.0 nanowatts.
(b) CB receivers and receivers that operate (tune) in the frequency
range 30 to 960 MHz that are provided only with a permanently attached
antenna shall comply with the radiated emission limitations in this
part, as measured with the antenna attached.
Goto Section: 15.109 | 15.113
Goto Year: 1996 |
1998
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public