Sec. 2.1517  Data recording/reporting requirements.

    The test report for an EPIRB shall contain the following 
information:
    (a) Specific identification, including the FCC ID, model and serial 
numbers, of the EPIRB under test.
    (b) The name and location of the test sites used for the 
measurements.
    (c) A description of the instrumentation and equipment, including 
antennas, used to perform the tests. For purchased equipment, the type, 
manufacturer and model number are generally sufficient as a description.
    (d) The test results and associated comparative information.
    (e) A description of any modifications made to the EUT or other 
system components during the testing.
    (f) A description and justification of all deviations from the 
procedures described herein.
    (g) The name and qualifications of the person responsible for the 
tests.
    (h) The date the tests were performed.
    (i) A statement signed by the individual responsible for the test 
that the EPIRB as tested complies or does not comply with the applicable 
FCC rules.
    (j) A statement signed by the individual responsible, either 
directly or indirectly, for production or marketing of the device tested 
that the unit tested is representative of the equipment that all be 
marketed.

[[Page 556]]

[GRAPHIC] [TIFF OMITTED] TC03JN91.005



[[Page 557]]

[GRAPHIC] [TIFF OMITTED] TC03JN91.006



[[Page 558]]

[GRAPHIC] [TIFF OMITTED] TC03JN91.007



[[Page 559]]

[GRAPHIC] [TIFF OMITTED] TC03JN91.008