Sec. 95.623  R/C transmitter channel frequencies.

    (a) The R/C transmitter channel frequencies are:

                                   MHz

26.995
27.045
27.095
27.145
27.195
27.255
72.01
72.03
72.05
72.07
72.09
72.11
72.13
72.15
72.17
72.19
72.21
72.23
72.25
72.27
72.29
72.31
72.33
72.35
72.37
72.39
72.41
72.43
72.45
72.47
72.49
72.51
72.53
72.55
72.57
72.59
72.61
72.63
72.65
72.67
72.69
72.71
72.73
72.75
72.77
72.79
72.81
72.83
72.85
72.87
72.89
72.91
72.93
72.95
72.97
72.99
75.41
75.43
75.45
75.47
75.49
75.51
75.53
75.55
75.57
75.59
75.61
75.63
75.65
75.67
75.69
75.71
75.73
75.75
75.77
75.79
75.81
75.83
75.85
75.87
75.89
75.91
75.93
75.95
75.97
75.99

    Note: Certain R/C transmitter channel frequencies are authorized to 
operate only certain kinds of devices (see part 95, subpart C.)

    (b) Each R/C transmitter that transmits in the 26-27 MHz frequency 
band with a mean TP of 2.5 W or less and that is used solely by the 
operator to turn on and/or off a device at a remote location, other than 
a device used solely to attract attention, must be maintained within a 
fequency tolerance of 0.01%. All other R/C transmitters that transmit in 
the 26-27 MHz frequency band must be maintained within a frequency 
tolerance of 0.005%. Except as noted in paragraph (c) of this section, 
R/C transmitters capable of operation in the 72-76 MHz band must be 
maintained within a frequency tolerance of 0.005%.
    (c) All R/C transmitters capable of operation in the 72-76 MHz band 
that are manufactured in or imported into the United States, on or after 
March 1, 1992, or are marketed on or after March 1, 1993, must be 
maintained within a frequency tolerance of 0.002%. R/C transmitters 
operating in the 72-76 MHz band and marketed before March 1, 1993, may 
continue to be operated with a frequency tolerance of 0.005% until March 
1, .
[53 1998 FR 36789 , Sept. 22, 1988;  53 FR 52713 , Dec. 29, 1988;  56 FR 15837 , 
Apr. 18, 1991]