Goto Section: 17.109 | 17.113

FCC 17.111
Revised as of June 29, 2005
Goto Year:2004 | 2006
Sec.  15.111   Antenna power conduction limits for receivers.

   

   (a) In addition to the radiated emission limits, receivers that
   operate (tune) in the frequency range 30 to 960 MHz and CB receivers
   that provide terminals for the connection of an external receiving
   antenna may be tested to demonstrate compliance with the provisions of
   Sec. 15.109 with the antenna terminals shielded and terminated with a
   resistive termination equal to the impedance specified for the
   antenna, provided these receivers also comply with the following: With
   the receiver antenna terminal connected to a resistive termination
   equal to the impedance specified or employed for the antenna, the
   power at the antenna terminal at any frequency within the range of
   measurements specified in Sec. 15.33 shall not exceed 2.0 nanowatts.

   (b) CB receivers and receivers that operate (tune) in the frequency
   range 30 to 960 MHz that are provided only with a permanently attached
   antenna shall comply with the radiated emission limitations in this
   part, as measured with the antenna attached.


Goto Section: 17.109 | 17.113

Goto Year: 2004 | 2006
CiteFind - See documents on FCC website that cite this rule

Report errors in this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public