Goto Section: 21.1101 | 21.1103
FCC 21.1102
Revised as of May 5, 2005
Goto Year:2004 |
2006
Sec. 22.1102 Definitions.
Call identifying information. Call identifying information means
dialing or signaling information that identifies the origin,
direction, destination, or termination of each communication generated
or received by a subscriber by means of any equipment, facility, or
service of a telecommunications carrier. Call identifying information
is "reasonably available" to a carrier if it is present at an
intercept access point and can be made available without the carrier
being unduly burdened with network modifications.
Collection function. The location where lawfully authorized
intercepted communications and call-identifying information is
collected by a law enforcement agency (LEA).
Content of subject-initiated conference calls. Capability that permits
a LEA to monitor the content of conversations by all parties connected
via a conference call when the facilities under surveillance maintain
a circuit connection to the call.
Destination. A party or place to which a call is being made (e.g., the
called party).
Dialed digit extraction. Capability that permits a LEA to receive on
the call data channel digits dialed by a subject when a call is
connected to another carrier's service for processing and routing.
Direction. A party or place to which a call is re-directed or the
party or place from which it came, either incoming or outgoing (e.g.,
a redirected-to party or redirected-from party).
In-band and out-of-band signaling. Capability that permits a LEA to be
informed when a network message that provides call identifying
information (e.g., ringing, busy, call waiting signal, message light)
is generated or sent by the IAP switch to a subject using the
facilities under surveillance. Excludes signals generated by customer
premises equipment when no network signal is generated.
Intercept Access Point (IAP). Intercept access point is a point within
a carrier's system where some of the communications or
call-identifying information of an intercept subject's equipment,
facilities, and services are accessed.
J-STD-025. The interim standard developed by the Telecommunications
Industry Association and the Alliance for Telecommunications Industry
Solutions for wireline, cellular, and broadband PCS carriers. This
standard defines services and features to support lawfully authorized
electronic surveillance, and specifies interfaces necessary to deliver
intercepted communications and call-identifying information to a LEA.
LEA. Law enforcement agency; e.g., the Federal Bureau of Investigation
or a local police department.
Origin. A party initiating a call (e.g., a calling party), or a place
from which a call is initiated.
Party hold, join, drop on conference calls. Capability that permits a
LEA to identify the parties to a conference call conversation at all
times.
Subject-initiated dialing and signaling information. Capability that
permits a LEA to be informed when a subject using the facilities under
surveillance uses services that provide call identifying information,
such as call forwarding, call waiting, call hold, and three-way
calling. Excludes signals generated by customer premises equipment
when no network signal is generated.
Termination. A party or place at the end of a communication path (e.g.
the called or call-receiving party, or the switch of a party that has
placed another party on hold).
Timing information. Capability that permits a LEA to associate
call-identifying information with the content of a call. A
call-identifying message must be sent from the carrier's IAP to the
LEA's Collection Function within eight seconds of receipt of that
message by the IAP at least 95% of the time, and with the call event
time-stamped to an accuracy of at least 200 milliseconds.
[ 64 FR 51717 , Sept. 24, 1999, as amended at 67 FR 22007 , May 2, 2002]
Goto Section: 21.1101 | 21.1103
Goto Year: 2004 |
2006
CiteFind - See documents on FCC website that
cite this rule
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.