FCC 15.111 Revised as of October 1, 2006
Goto Year:2005 |
2007
Sec. 15.111 Antenna power conduction limits for receivers.
(a) In addition to the radiated emission limits, receivers that operate
(tune) in the frequency range 30 to 960 MHz and CB receivers that provide
terminals for the connection of an external receiving antenna may be tested
to demonstrate compliance with the provisions of Sec. 15.109 with the antenna
terminals shielded and terminated with a resistive termination equal to the
impedance specified for the antenna, provided these receivers also comply
with the following: With the receiver antenna terminal connected to a
resistive termination equal to the impedance specified or employed for the
antenna, the power at the antenna terminal at any frequency within the range
of measurements specified in Sec. 15.33 shall not exceed 2.0 nanowatts.
(b) CB receivers and receivers that operate (tune) in the frequency range 30
to 960 MHz that are provided only with a permanently attached antenna shall
comply with the radiated emission limitations in this part, as measured with
the antenna attached.
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.