Sec.  18.209   Identification of authorized equipment.

   (a) Each device for which a grant of equipment authorization is issued under
   this part shall be identified pursuant to the applicable provisions of
   subpart  J of part 2 of this chapter. Changes in the identification of
   authorized  equipment may be made pursuant to  Sec. 2.933 of part 2 of this
   chapter. FCC Identifiers as described in  Sec.  Sec. 2.925 and 2.926 of this chapter
   shall not be used on equipment subject to verification or Declaration of
   Conformity.

   (b) Devices authorized under the Declaration of Conformity procedure shall
   be labelled with the logo shown below. The label shall not be a stick-on,
   paper label. It shall be permanently affixed to the product and shall be
   readily visible to the purchaser at the time of purchase, as described in
    Sec. 2.925(d) of this chapter. Permanently affixed means that the label is
   etched, engraved, stamped, silkscreened, indelibly printed, or otherwise
   permanently marked on a permanently attached part of the equipment or on a
   nameplate of metal, plastic, or other material fastened to the equipment by
   welding, riveting, or a permanent adhesive. The label must be designed to
   last the expected lifetime of the equipment in the environment in which the
   equipment may be operated and must not be readily detachable. The logo
   follows:
   [er07jy98.027.gif]

   View or download PDF

   [ 63 FR 36603 , July 7, 1998]