§ 2.910   Incorporation by reference.

   (a) The materials listed in this section are incorporated by reference
   in this part. These incorporations by reference were approved by the
   Director of the Federal Register in accordance with 5 U.S.C. 552(a) and
   1 CFR part 51. These materials are incorporated as they exist on the
   date of the approval, and notice of any change in these materials will
   be published in the Federal Register. All approved material is
   available for inspection at the Federal Communications Commission, 445
   12th St. SW., Reference Information Center, Room CY-A257, Washington,
   DC 20554, (202) 418-0270 and is available from the sources below. It is
   also available for inspection at the National Archives and Records
   Administration (NARA). For information on the availability of this
   material at NARA, call (202) 741-6030, or go to:
   http://www.archives.gov/federal_register/code_of_federal_regulations/ib
   r_locations.html.

   (b) International Electrotechnical Commission (IEC), IEC Central
   Office, 3, rue de Varembe, CH-1211 Geneva 20, Switzerland, Email:
   inmail@iec.ch, www.iec.ch.

   (1) CISPR 16-1-4:2010-04: “Specification for radio disturbance and
   immunity measuring apparatus and methods—Part 1-4: Radio disturbance
   and immunity measuring apparatus—Antennas and test sites for radiated
   disturbance measurements”, Edition 3.0, 2010-04, IBR approved for
   § § 2.948(d) and 2.950(f).

   (2) [Reserved]

   (c) Institute of Electrical and Electronic Engineers (IEEE), 3916
   Ranchero Drive, Ann Arbor, MI 48108, 1-800-699-9277,
   http://www.techstreet.com/ieee; (ISO publications can also be purchased
   from the American National Standards Institute (ANSI) through its NSSN
   operation (www.nssn.org), at Customer Service, American National
   Standards Institute, 25 West 43rd Street, New York, NY 10036, telephone
   (212) 642-4900.)

   (1) ANSI C63.4-2014: “American National Standard for Methods of
   Measurement of Radio-Noise Emissions from Low-Voltage Electrical and
   Electronic Equipment in the Range of 9 kHz to 40 GHz,” ANSI approved
   June 13, 2014, IBR approved for § 2.950(h) and:

   (i) Sections 5.4.4 through 5.5, IBR approved for § § 2.948(d) and
   2.950(f); and

   (ii) [Reserved]

   (2) ANSI C63.10-2013, “American National Standard of Procedures for
   Compliance Testing of Unlicensed Wireless Devices,” ANSI approved June
   27, 2013, IBR approved for § 2.950(g).

   (d) International Organization for Standardization (ISO), 1, ch. De la
   Voie-Creuse, CP 56, CH-1211, Geneva 20, Switzerland; www.iso.org ;
   Tel.: + 41 22 749 01 11; Fax: + 41 22 733 34 30; email:
   central@iso.org. (ISO publications can also be purchased from the
   American National Standards Institute (ANSI) through its NSSN operation
   (www.nssn.org), at Customer Service, American National Standards
   Institute, 25 West 43rd Street, New York, NY 10036, telephone (212)
   642-4900.)

   (1) ISO/IEC 17011:2004(E), “Conformity assessment—General requirements
   for accreditation bodies accrediting conformity assessment bodies,”
   First Edition, 2004-09-01, IBR approved for § § 2.948(e), 2.949(b),
   2.950(c) and (d), and 2.960(c).

   (2) ISO/IEC 17025:2005(E), “General requirements for the competence of
   testing and calibration laboratories,” Section Edition, 2005-05-15, IBR
   approved for § § 2.948(e), 2.949(b), 2.962(c) and (d).

   (3) ISO/IEC 17065:2012(E), “Conformity assessment—Requirements for
   bodies certifying products, processes and services,” First Edition,
   2012-09-15, IBR approved for § § 2.950(b), 2.960(b), 2.962(b), (c), (d),
   (f), and (g).

   (4) ISO/IEC Guide 58:1993(E), “Calibration and testing laboratory
   accreditation systems—General requirements for operation and
   recognition”, First Edition 1993, IBR approved for § 2.950(d).

   (5) ISO/IEC Guide 61:1996(E), “General requirements for assessment and
   accreditation of certification/registration bodies”, First Edition
   1996, IBR approved for § 2.950(c).

   (6) ISO/IEC Guide 65:1996(E), “General requirements for bodies
   operating product certification systems,” First Edition 1996, IBR
   approved for § 2.950(b).

   [ 80 FR 33439 , June 12, 2015]

   return arrow Back to Top

Application Procedures for Equipment Authorizations

   return arrow Back to Top